ZTE AXON A1R FRP Removal
|
Unlock FRP A1R
ZTE AXON A1R FRP Remove Tool One click Without Box
Free Download For All By Dev-Time
FRP Remove Tool In FTM + EDL Mode With
Firehose Protocol For Unbrick And Flash Firmware
ZTE AXON A1R FRP
REMOVE FRP AXON A1R
Bypass FRP AXON A1R
How To Remove FRP For ZTE AXON A1R
- Download : ZTE AXON A1R FRP Remove Tool
- Turn Off The Phone
- Press Volume UP + Power Button For ENTER To (FTM Mode)
- Connect Phone With USB Cable
- Run FRP Remove Tool
- Wait For Phone Connect And Auto Switch To EDL Mode
- The Phone Is Direct Connect With Tool And Remove FRP
- if FRP Remove Tool Appened (Erase FRP Done) Then Disconnect Phone And Reboot
Log
# Device Info
ZTE Axon
Model Number: A1R
(Press Volume UP + Power For Enter To FTM Mode)cls
|
Waiting for 0 seconds, press a key to continue ...
[*] Protocol 8x10.mbn
[*] Wait For QDLoader 9008
[*] Phone Found COM12
[*] Erase FRP Partition
[*] Erase FRP Done
Press any key to continue . . .
------------------------------------------------------------------------------------------------------------
How To Enter To EDL Mode
------------------------------------------------------------------------------------------------------------
You can use the fire hose coil supplied with each model for
Read \ Write \ erase Partitions using emmcdl commands
Read
emmcdl -p COM12 -f prog_emmc_firehose_***.mbn -d modem -o modem.bin
Write
emmcdl -p COM12 -f prog_emmc_firehose_***.mbn -b modem modem.bin
erase
emmcdl -p COM12 -f prog_emmc_firehose_***.mbn -e modem
emmcdl.exe
EMMCDL More Commands
Examples: emmcdl -p COM8 -info
emmcdl -p COM8 -gpt
emmcdl -p COM8 -SkipWrite -SkipStorageInit -MemoryName ufs -f prog_emmc_firehose_8994_lite.mbn -x memory_configure.xml
emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -x rawprogram0.xml -SetActivePartition 0
emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -ffu wp8.ffu
emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -d 0 1000 -o dump_1_1000.bin
emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -d SVRawDump -o svrawdump.bin
emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -b SBL1 c:\temp\sbl1.mbn
emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -e 0 100
emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -e MODEM_FSG
emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -raw 0x75 0x25 0x10
------------------------------------------------------------------------------------------------------------
How To Enter To EDL Mode
FTM Method : turning off the phone and then pressing the volume up key + the power key and the phone will enter the FTM mode and use the command
EDL Cable Method : Bring a cable USB cable Then reveal the wires and connect (D+ with GND) As shown in the picture
------------------------------------------------------------------------------------------------------------
You can use the fire hose coil supplied with each model for
Read \ Write \ erase Partitions using emmcdl commands
Read
emmcdl -p COM12 -f prog_emmc_firehose_***.mbn -d modem -o modem.bin
Write
emmcdl -p COM12 -f prog_emmc_firehose_***.mbn -b modem modem.bin
erase
emmcdl -p COM12 -f prog_emmc_firehose_***.mbn -e modem
emmcdl.exe
EMMCDL More Commands
Examples: emmcdl -p COM8 -info
emmcdl -p COM8 -gpt
emmcdl -p COM8 -SkipWrite -SkipStorageInit -MemoryName ufs -f prog_emmc_firehose_8994_lite.mbn -x memory_configure.xml
emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -x rawprogram0.xml -SetActivePartition 0
emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -ffu wp8.ffu
emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -d 0 1000 -o dump_1_1000.bin
emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -d SVRawDump -o svrawdump.bin
emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -b SBL1 c:\temp\sbl1.mbn
emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -e 0 100
emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -e MODEM_FSG
emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -raw 0x75 0x25 0x10
Post a Comment